background image

http://www.jperkinsdistribution.co.uk

SPECIFICATIONS

Main rotor diameter ............................................340 mm

Fuselage length....................................................365 mm

Radio control ................4 channel with 2 micro servos

4-in-1 unit  ....... speed cont., piezo gyro, receiver, etc.

Model weight (no battery)...........................179g (6.3oz)

Flying weight..................................................222g (7.8oz)

CONTENTS

1 .................................................... Assembled helicopter

1 ............................................4 ch 35Mhz FM transmitter

1 .................................“4 in1” on-board electronics unit 

2 ....................................................................Micro servos

1pr.............................Transmitter and receiver crystals 

1 ................................7.4V lithium polymer battery pack

1 ........................... Lithium polymer 12V DC/DC Charger

1 ...............................Twister Bell 47 instruction manual

1 .......................Lithium polymer charging/safety guide

1 ... FREE UPPER AND LOWER MAIN ROTOR BLADES

REQUIRED

1 .................................................JP 5537867 screwdriver

8 ........................................AA alkaline pencell batteries

either...........................  JP 5510050 12V gel cell battery

or.................. JP 4460049 ULTRAPOWER power supply

FEATURES

  Factory-assembled COMPLETELY READY-TO-FLY 

scale RC helicopter

  Around 10-15 minutes flight time per charge

  Co-axial rotors for unbelievable stability

  One-piece '4 in 1' on-board computerised 

electronics unit saves weight, improves 

performance and simplifies use

  Transmitter with charging socket, adjustable 

height sticks and silky operation stick units

  Speed controller disallows high throttle starts

  Throttle Fail-safe cuts in when signal lost 

  Gyro is disabled at closed throttle to prevent 

unexpected tail rotor starts during transport

  Ball bearing swashplate and main shaft 

  Requires 8 AA alkalines, 12V DC source

  Lithium polymer battery & 12V DC Li-Po fast 

charger included

  Ideal for learning to fly!

READY TO FLY TWISTER BELL 47

LEARN TO FLY WITH A 'REAL' RC HELICOPTER!

Earth-busting flight stability!

FREE 

Flight theory/training guide

FREE 

Online instructional videos

FREE 

Spare main blades set             

factory 

assembled

& ready to fly

with new Li-poly 

battery & charger

TEST-FLOWN &

FLIGHT-GUARANTEED!

DOWNLOADABLE VIDEOS

Twister Bell 47 Introduction & Flight Preparation

Twister Bell 47 Transmitter Controls

Twister Bell 47 Advanced Flying

'Real' RC heli flying has never been this easy!

10-15 minute flights!

Summary of Contents for TWISTER BELL 47













Reviews: