P
RODUCT INFORMATION
3.5.11. Load hook
NOTICE
Load hooks may not be loaded at the top. They
may not be directed or annealed. This may result
in damage to the load hook.
If the load hook is bent, your product
PROFI 16 TI
must be inspected.
The permissible temperature range is -40
◦
C (-
40
◦
F) to +150
◦
C (302
◦
F).
3.5.12. Chain
WARNING
Danger from chain fracture
The fatigue strength of chains is significantly im-
paired by extreme corrosion (pitting corrosion). In
addition, rusty chains result in heavy wear. There
is a danger of breakage!
I
Do not use rusty chains
WARNING
Danger from chain fracture
Hydrogen-induced embrittlement with subsequent
stress corrosion from highly corrosive media (e.g.
sea water) may appear on high-strength alloys
(e.g. on the chain). There is a danger of break-
age!
So-called recombination toxins promote this
process. Hydrogen sulphides, cyanide, arsenic
compounds and thiocyanates are known for this.
I
Protect the chain against strong corrosion
NOTICE
JDN chains are matched in close tolerances to
the sprocket. In order to ensure an optimum func-
tion of the chain and in order to prevent dangers,
only genuine JDN chains may be installed.
Your product
PROFI 16 TI
has 3 falls and the
chain size 16 x 45.
The chain is manufactured according to DIN EN
818-7. The permissible temperature range is -
40
◦
C (-40
◦
F) to +150
◦
C (+302
◦
F).
Page
18
of 64
Doc.-No.: VA049318-20-OM-EN-0319-64-6
