Matrix Executive Electric Height Adjustable Desk
JBMATEL12K, JBMATEL15K, JBMAEV15OA
A.
Learning Process:
Press
and
button for 3 seconds after the initial assembly of thedesk.
B.
Stroke Reset
After the initial assembly of the desk or if the display shows either of “E10, E20
E60”,
press the
button for 3 seconds or until it shows
, the desk will automatically
move down to the lowest point and rebound back up. The learning process & stroke reset
is then finished and will display the lowest height position.
2. Lifting
The desk will go up and down when pressing
or
.
3. Height memory setting
Move the desk up or down to a desired position. Press the
button after which the
display will blink, then press a numeric key (
or
) to save the desired height
to the corresponding preset position. The display will stop blinking and exit the memory
mode if there is no numeric key pressed within 5 seconds.
Once you have saved the desired heights you can press that numeric key to automatically
move the desk to the saved height.
4.
1. Press and hold the
button for 3 seconds, display will show “S--" and blink.
2. Press the
button to move through the below setup menu functions, the function list
is as follows:
Unit
（
）
: Display height on screen in centimeters or inches;
Brightness
（
）
: Brightness of the controller;
1
/3
User Manual and Trouble Shooting Guide
1. nitial Setup
I
or
,
,
Setup Menu
