11
/16
System Operation Manual - E3 Dash
10/29/14
that it engages the holder and locks into place.
The key
does not need to be used when installing the battery.
Removing the battery
To remove the battery, unlock the battery lock
with the key, pull the battery out of the
upper battery holder, then lift it out of the lower battery holder.
Turning on the power
1. Press the power button on the battery first
(see page 4)
. The battery level indicator
will light up.
2. Next push the power button ( ) on the control pad. The display will initialize, displaying
a countdown on its screen. During this countdown, the software is self-testing and calibrating
the bike’s sensors. While this countdown is shown, do not step on the pedals. The calibration
includes setting a zero-point for the pedal sensors, and any weight on the pedals will disrupt
this process. After the countdown completes, the bike is ready to ride.
To turn off the power
Typical way, using the handlebar controls: Press the control pad power button ( ) two
times, for 2 seconds each time. After the first press, the bike will enter assistance level 0,
showing ‘0’ on the display’s assist level indicator (see “Assist levels” on page 12). After the
second press, the bike will turn off and the display screen will go blank, as will the battery
power indicator.
Alternative way, directly from the battery: Hold the battery power button for 2 seconds
and confirm the LEDs are off.
