The Z8 Encore! XP
®
F64XX Series Development Kit
UM028301-0317
4
Z8 Encore! XP
®
F64XX Series Development Kit
User Manual
Download and Install the ZDS II Software and Documenta-
tion
Observe the following steps to install your ZDS II software and documentation.
If you have already installed ZDS II – Z8 Encore! <version> and have downloaded the soft-
ware and documentation by following the procedure on the paper insert in your kit
(FL0174), you’re ready for
Appendix B. Installing the USB SmartCable Driver
1. Prior to connecting the Z8 Encore! XP F64XX Series Development Board to your
development PC, download ZDS II for Z8 Encore! v5.2.2 (or later) from the
Zilog
Free Software
category in the Zilog Store.
2. When your download is complete, unzip the file to your local drive, then double-click
the installation file named
ZDS2_Z8Encore!_<version>.exe
, and follow the on-
screen instructions.
3. When the ZDS II installation is complete, double-click the installation file named
DOCS_Z8Encore!_<version>
.exe
and follow the on-screen instructions.
Download and Install the Sample Project and Documenta-
tion
1. Download the Z8F64200100KITG Sample Project and Documentation <Version>
Zilog Free Software
category in the Zilog Store.
2. When the download is complete, unzip the file to your hard drive, then double-click
the installation file named Z8F64200100KITG<version>.exe and follow the onscreen
instructions.
3. When the installation is complete, view the Z8Encore! XP F64XX Series Dev Kit
User Manual (UM0283, a PDF file); this document will be located in the following
path, by default:
C:\Program files (x86)\Zilog\ZDSII-Z8Encore!_5.2.2\Docu-
mentation\Tools_Documentation
Note:
