Introduction
1 Introduction
1.1 Overview
Congratulations on your purchase of the IXXAT-PC-CAN-interface PC-I 04/PCI, a
high-quality electronic component developed and manufactured according to the
latest technological standards.
This handbook is intended to familiarize you with your interface, also referred to
in the following as PC-I 04/PCI. Please read this handbook before beginning with
the installation.
Among other things, the handbook describes the hardware architecture of the
interface, knowledge of which is necessary for creating your own drivers.
If you are using the interface with the IXXAT-driver VCI or other IXXAT-software,
you can leave out Sections 4 and 5.
1.2 Features
The most important technical features are as follows:
•
Constructed as PCI-plug-in card
•
32 bit memory-mapped access (1024 byte storage space and 128 byte I/O
address space are required for the CAN controller)
•
Basic address and interrupt via plug’n’play PCI-Bios
•
One or two CAN-circuits with Philips SJA1000 with 16 MHz cycle time
•
CAN-bus connection according to ISO 11898-2 High Speed on board (as an
option galvanically isolated)
•
Bus connection carried out separately for each CAN-controller
•
Option of one or two CAN-protective circuits on the board (CAN-reactor to
suppress faults and short spikes on the CAN-leads)
•
Pin assignment according to CiA/DS-102
•
Electro-magnetically compatible PCB design (4-layer multilayer)
Copyright IXXAT Automation GmbH
PC-I 04/PCI-Manual, Version 1.2
5
Summary of Contents for PC-I 04/PCI
Page 4: ......
