Appendix
4 Appendix
4.1 Technical
Data
The following data refer to the iPC-I320/PCI II interface version with two Philips
SJA1000 CAN controllers and two galvanically isolated bus transceivers according
to ISO/IS 11898-2.
PCI interface:
32 Bit / 33 MHz, PCI Specification 2.1
Microcontroller:
Dallas DS80C320-ECG, 22,1184 MHz
RAM / Flash:
128 kByte / 128 kByte
CAN controller:
Philips SJA1000T, 16 MHz
CAN transceiver (high-speed):
Texas Instruments SN65HVD251 or
Philips PCA 82C251
Max. number of CAN bus nodes: 120
CAN bus terminal resistor:
none
CAN run trip delay:
with galv. isolation typically 50 ns, max. 75 ns
CAN baud rates:
5 kBaud – 1 MBaud
Max. CAN throughput per channel:
9500 messages/s (Reception with VCI V3)
2000 messages/s (Transmission with VCI V3)
Galvanic isolation:
500 V AC for one minute between CAN bus and
internal logic
Power supply:
5 V DC
±
5 % via PCI slot
Power consumption:
typically 320 mA
max. 380 mA
Dimensions:
124 mm x 97,5 mm (without CAN Sub-D9
connectors)
Weight:
without additional slot plate for second CAN
approx. 91 g
with additional slot plate for second CAN
approx. 128 g
Working temperature range:
0 - 70 °C
Storage temperature range:
-40 °C .. +85 °C
Relative humidity:
10 - 95 %, non-condensing
Copyright IXXAT Automation GmbH
iPC-I 320/PCI II - Manual, Version 1.0
12
Summary of Contents for iPC-I 320/PCI II
Page 4: ......
