Pin assignment
5.3 RS232
The first serial interface is connected to the second Sub-D-9 plug of the
CAN@net. Assignment corresponds to the PC-standard.
Pin no.
Signal name
1 DCD
2 RxD
3 TxD
4 DTR.
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Assignment of first RS232 connection
5.4 Ethernet
Connection to the Ethernet is established via an RJ45-socket. For this a twisted-
pair cable is required.
The allocation corresponds to the Ethernet standard.
Pin no.
Signal name
1 Tx
+
2 Tx
-
3
Rx +
4 n.c.
5 n.c.
6 Rx
-
7 n.c.
8 n.c.
Allocation Ethernet connection RJ45 socket
Copyright IXXAT Automation GmbH
CAN@net Manual, Version 1.7
17
