iXsystems TrueNAS ES12, Basic Setup Manual

Page: 3 / 12

Support: 855-473-7449 or 408-943-4100 Email: support@ixsystems.com Page 1
The TrueNAS ES12 is a 2U, 12-bay, SAS3(12 Gb/s) expansion shelf with dual expansion controllers and redun-
dant power supplies�
ES12 Expansion Shelf
ES12 Bezel
Set of rackmount rails. The rails have a specific front
end, identified by a label visible on the left above. The
front ends of the rails must be installed facing the
front of the rack�
A total of 12 populated or empty “airbaffle” drive trays.
Trays must be installed in all bays to maintain proper
airflow for cooling. Up to ten drive trays are packed
in a cardboard tray� Additional drivetrays are packed
with the accessory kit�
Accessory kit with 2 IEC C13 to NEMA 5-15P power
cords, 2 IEC C14toC14 cords, and a set of velcro cable
ties�
Two 3-meter Mini SAS HD to Mini SAS HD cables�
TrueNAS units are carefully packed and shipped with trusted carriers to arrive in perfect condition� If there is
any shipping damage or any parts are missing, please take photos and contact iXsystems support immediately
at support@ixsystems�com or 855-GREP4-iX (855-473-7449) or 408-943-4100 �
Please locate and record the hardware serial numbers on the back of each chassis for quick reference�
Carefully unpack the shipping boxes and locate these components:
1 Unpacking the Unit