IXIA XGS2-HS Page 16 Getting Started Manual Download

Page: 16 / 90

Indicators and Controls

Power LED

Indicates the current power state:

Green: the system is ON and all power supplies are operational.

Off: the system is powered off or one or more power supplies are not operational.

Power button

Power button: Power cycles the unit:

Short press (0.5 to 2 seconds): Graceful system shutdown. Allow up to 30 seconds for the system to power-
down.

Long press (4 seconds): Force Power Shutdown - immediate.

Serial port

Provides attachment to the serial port of a workstation, using the provided RJ45 to DB232 cable.

USB ports

Provides attachment of USB devices.

LAN port

An RJ-45 10/100/1000-BaseT management port, providing connection to your network.

Product Specifications

This section describes the network emulator regulatory compliance, safety and product specifications.

XGS2 Chassis Platform Overview | 16

Summary of Contents for XGS2-HS



























































































Search results

Summary of Contents for XGS2-HS

Reviews:

Related manuals for XGS2-HS

Brands by name

Popular brands

IXIA XGS2-HS, Getting Started Manual

Search results

Summary of Contents for XGS2-HS

Reviews:

Related manuals for XGS2-HS

Brands by name

Popular brands