Set the System Time
It is important to set the PerfectStorm ONE system time
before
installing any licenses. Time discrepancies detected by the system will invalidate
the licenses. You use the Administrative Console to set the time:
1.
Open a serial connection or an SSH connection from your terminal emulation application.
The Administrative Console prompts you to log in.
2.
Enter the following credentials:
l
User ID: admin
l
Password: admin
The Administrative Console presents the main menu.
3.
Navigate to menu selection
t
(Set system date and time), then
press
Enter
.
The menu presents the options:
l
set the time using NTP
l
set the time manually
4.
Select the option that is appropriate for your network, then press
Enter
5.
Follow the prompts to:
l
either select the predefined NTP servers,
l
or enter the date and time manually.
6.
Press
Enter
to apply the settings.
7.
Select
Q
(Quit) from the menu, then press
Enter
to exit from the
Administrative Console.
41 | System Configuration
Summary of Contents for PerfectStorm ONE
Page 1: ...PerfectStorm ONE Getting Started Guide ...
Page 23: ...23 ...
Page 27: ...27 ...
Page 71: ...V virtual machines 25 71 ...
