GAPS
-
User Guide
4.2.2.1
Configuring GAPS Network Interface
Connect GAPS powered on to a computer, launch the Web-based User Interface on the
computer and edit the network parameters. Make GAPS compatible to your local Ethernet
network.
Every GAPS has its own IP address and net mask. In order to insert GAPS in your local
network, edit the network parameters.
Important
Restrictions on the choice of GAPS IP address and mask are detailed in annex B.
Gateway IP address is the address of the workstation connected to other networks of the
vessel.
Turn GAPS OFF and ON after every IP address edition.
1.
Click on
INSTALLATION
in the menu and select
NETWORK
.
The
NETWORK SETTINGS
window opens.
2.
Edit the
IP Address
by clicking in the fields and entering new values.
3.
Edit the
Net Mask
by clicking in the fields and entering new values.
4.
Edit the
Gateway
by clicking in the fields and entering new values.
5.
Click on
OK
to validate the input of the values.
6.
Turn the system OFF and then ON.
60
MU-GAPS-AN-005-H - November 2019
Summary of Contents for GAPS
