IWILL DP533 Series, User Manual

Page: 85 / 114

5: Sy 5: Sy
5: Sy 5: Sy
5: System Configur stem Configur
stem Configur stem Configur
stem Configuration ation
ation ation
ation
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
U U
U U User’
ser’
ser’ ser’ ser’s Manual
s Manual
s Manual s Manual s Manual 5•15 5•15 5•15 5•15 5•15
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Integrated Peripherals
Main Section Functions
Configures the peripheral features integrated onto the
motherboard.
Default & Autodetected Settings
Everything on this screen is an optimized default. The
IDE transfer mode settings are autodetected. The system
will work with these defaults. The port settings are stan-
dard PC settings.
Setting Options & Constraints
You can disable onboard devices and change port set-
tings. If you install an IR port module, you have to set the
“UART Mode Select” item in the Super IO Device section
to the appropriate IR setting. You can also reconfigure the
parallel port in that section. Enable USB Keyboard Sup-
port if you will use a USB keyboard.
CMOS Setup Utility – Integr CMOS Setup Utility – Integr CMOS Setup Utility – Integr CMOS Setup Utility – Integr CMOS Setup Utility – Integrated P ated P ated P ated P ated Peripher eripher eripher eripher eripherals als als als als