REL1.0
Page 51 of 58
iWave Systems Technologies Pvt. Ltd.
Zynq-7000 SoC SODIMM Development Platform Hardware User Guide
2.7.2
Power ON/OFF Switch
The Zynq-7000 SoC SODIMM carrier board has power ON/OFF switch (SW3) to control the Main power Input
ON/OFF functionality. This power ON/OFF switch is physically located at the top of the board as shown below.
Figure 11: Power On/Off Switch
2.7.3
Reset Switch
The Zynq-7000 SoC SODIMM carrier board supports Push button switch (SW1) to reset the Zynq 7000 SoC CPU.
Reset signal of SODIMM edge connector Pin 187 is directly connected from Reset Push button switch. This Reset
Push button switch (SW1) is physically located at the top of the board as shown below.
Figure 12: Reset Switch