REL 1.0
Page 78 of 89
RZ/G1M/G1N Qseven Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
4.
TECHNICAL SPECIFICATION
This section provides detailed information about the RZ/G1M/G1N Qseven Carrier Board technical specification with
Electrical, Environmental and Mechanical characteristics.
4.1
Electrical Characteristics
4.1.1
Power Input Requirement
The RZ/G1M/G1N Qseven Carrier Board is designed to work with a +12V external power and uses on board voltage
regulators for internal power management. 12V power input from an external power supply is connected to the
Qseven Carrier Board through Power Jack (J4). This 2.5mm x 6.5mm barrel connector Jack should fit standard DC
Plugs with an inner dimension of 2.5mm and an outer dimension of 5.5mm. This connector is physically placed at the
top of the board as shown below.
Figure 32: Power Jack
Table 28: Power Jack Pin Out
Pin
No
Pin Name
Signal Name
Signal Type /
Termination
Description
1
VCC
VCC_12V
12V, Power
Input Supply Voltage.
2
GND
GND
Power
Ground.
3
GND
GND
Power
Ground.