REL 1.0
Page 73 of 89
RZ/G1M/G1N Qseven Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
3.3.3
HDMI Output
The RZ/G1M/G1N Camera Add-On Module supports one HDMI output connector to support bigger monitor. The
DU1 24bpp RGB signals from RZ/G1M/G1N CPU are connected to “ADV7511W” RGB to HDMI Transmitter along with
control signals. Also RZ/G1M/G1N CPU’s I2C5 interface is connected to HDMI Transmitter for control &
configuration. Output of HDMI transmitter is connected to Standard HDMI connector with ESD protection circuitry.
HDMI Output connector (J10) is physically located on top of the board as shown below.
Figure 28: HDMI Output
Table 24: HDMI Output connector Pin Out
Pin
No
Pin Name
Signal Name
Signal Type /
Termination
Description
1
D2+
O, TMDS
HDMI data2 pair positive.
2
GND
GND
Power
Red Pair Ground.
3
TMDS_D2-
D2-
O, TMDS
HDMI data2 pair negative.
4
D1+
O, TMDS
HDMI data1 pair positive.
5
GND
GND
Power
Green Pair Ground.
6
TMDS_D1-
D1-
O, TMDS
HDMI data1 pair negative.
7
D0+
O, TMDS
HDMI data0 pair positive.
8
GND
GND
Power
Blue Pair Ground.
9
TMDS_D0-
D0-
O, TMDS
HDMI data0 pair negative.
10
T
CLK+
O, TMDS
Display Clock pair positive.
11
GND
GND
Power
Clock pair Ground.
12
TMDS_CLK-
CLK-
O, TMDS
Display Clock pair negative.