REL 1.0
Page 65 of 89
RZ/G1M/G1N Qseven Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
Pin
No
Signal Name
Signal Type /
Termination
Description
36
Q7_GPIO0_(GP2_12)
I,3.3V CMOS/
10K PU
Qseven General purpose Input/Output0.
This pin is connected to Capacitive Touch
Connector and Resistive Touch Controller for
touch interrupt.
Note: This pin is also connected to Qseven
MXM connector 185
th
pin through resistor and
default populated.
37
GP2_I2C_CLK
-
NC in RZ/G1M/G1N carrier board.
Note: This pin is connected to Qseven MXM
connector 127
th
pin.
38
GND
Power
Ground.
39
DP_HPD#
-
NC in RZ/G1M/G1N carrier board.
Note: This pin is connected to Qseven MXM
connector 154
th
pin.
40
Q7_GPIO6_(GP2_8)
IO, 3.3V CMOS
Qseven General purpose Input/Output6.
Note: This pin is connected to Qseven MXM
connector 191
st
pin through resistor and
default populated.
41
Q7_GPIO3_(GP2_19)
I, 3.3V CMOS/
10K PU
Qseven General purpose Input/Output3
This pin is connected from Audio Out Jack for
Headphone detect.
Note: This pin is also connected to Qseven
MXM connector 188
th
pin through resistor and
default populated.
42
SSI_RST(GP2_13)
O, 3.3V CMOS
Audio Reset.
This pin is connected to Capacitive touch for
reset.
Note: This pin is also connected to Qseven
MXM connector 61
st
pin through resistor and
default populated.
43
GND
Power
Ground.
44
Q7_GPIO5_(GP2_4)
IO, 3.3V CMOS
Qseven General purpose Input/Output5.
Note: This pin is connected to Qseven MXM
connector 190
th
pin through resistor and
default populated.
45
Q7_GPIO2_(GP2_21)
I, 3.3V CMOS/
10K PU
Qseven General purpose Input/Output2.
This pin is connected from Audio IN Jack for
Headphone Mic detect.
Note: This pin is also connected to Qseven
MXM connector 187
th
pin through resistor and
default populated.