iWave iW-RainboW-G20D, Hardware User'S Manual, Page: 27 / 89

REL 1.0
Page 27 of 89
RZ/G1M/G1N Qseven Development Platform Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
Pin
No.
Qseven MXM
Connector Pin
Name
Signal Name
Signal Type/
Termination
Description
174 P NA - NC in RZ/G1M/G1N Qseven SOM.
This pin is connected to PCIex4 connector
(J4) in carrier board.
175 PCIE1_TX- NA - NC in RZ/G1M/G1N Qseven SOM.
This pin is connected to PCIex4 connector
(J4) in carrier board.
176 PCIE1_RX- NA - NC in RZ/G1M/G1N Qseven SOM.
This pin is connected to PCIex4 connector
(J4) in carrier board.
177 UART0_RX SCIFB1_RXD(GP7_10
) O, 3.3V CMOS SCIFB1 interface serial data receiver.
This pin is connected from Data UART
Header (J1) 04
th
Pin.
178 UART0_CTS# SCIFB1_CTS#(GP7_8) O, 3.3V CMOS SCIFB1 interface ready to send handshake
signal.
This pin is connected from Data UART
Header (J1) 02
nd
Pin.
179 P PCIe1_TXP I, DIFF PCIe Channel0 Transmit data output
positive.
This pin is connected to PCIe x 4 connector
(J4) or Mini PCIe connector (J26) through
PCIe Switch.
180 P PCIe1_RXP O, DIFF PCIe Channel0 Receive data input positive.
This pin is connected to PCIe x 4 connector
(J4) or Mini PCIe connector (J26) through
PCIe Switch.
181 PCIE0_TX- PCIe1_TXN I, DIFF PCIe Channel0 Transmit data output
negative.
This pin is connected to PCIe x 4 connector
(J4) or Mini PCIe connector (J26) through
PCIe Switch.
182 PCIE0_RX- PCIe1_RXN O, DIFF PCIe Channel0 Receive data input negative.
This pin is connected to PCIe x 4 connector
(J4) or Mini PCIe connector (J26) through
PCIe Switch.
183 GND GND Power Ground.
184 GND GND Power Ground.
185 LPC_AD0/ GPIO0 Q7_GPIO0_(GP2_12) IO,3.3VCMOS/
10K PU
General purpose Input/Output0.
This GPIO is used for Touch Interrupt and
connected
from Capacitive Touch
Connector or Resistive Touch Controller.