Rev 1.1
Page 19 of 61
i.MX6 Pico ITX - SBC Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
9
VCC/VDD
Power
3.3V
Supply Voltage
10
VSS2
Power
0V
Ground
11
SD1_DAT5(NANDF_D1)
Input / Output
3.3V CMOS
Data Line (bit5)
Optional, Not
supported by
default.
12
SD1_CMD
Input / Output
3.3V CMOS/
10K Pull-up
Command/
Response
13
SD1_DAT4(NANDF_D0)
Input / Output
3.3V CMOS
Data Line (bit4)
Optional, Not
supported by
default.
14
SD1_DAT3
Input / Output
3.3V CMOS
Data Line (bit3)
15
SD1_DAT2
Input / Output
3.3V CMOS
Data Line (bit2)
2.5
Audio/Video Features
2.5.1
AC’97 audio codec Interface
The Audio CODEC used on the i.MX6 Pico ITX – SBC is ALC5610 from Realtek with inbuilt Headphone
amplifier and MIC which is used to provide a complete audio solution for portable products. This Audio
codec is connected to AUDMUX channel 3 of the i.MX6 CPU. i.MX6 Pico ITX – SBC supports 3.5mm
stereo Headphone Out Jack and 3pin MIC In header which are physically located on top of the board.
Figure 5: Audio Jack