REL 1.0
Page 57 of 59
iWave Systems Technologies Pvt. Ltd.
iW-RainboW-G15M Android User Manual
7.
APPENDIX
7.1
Frequently Asked Question
1.
How to power ON the iW-RainboW-G15M-Q7 platform?
Refer the section
Powering ON iW-RainboW-G15D
of Quick Start Guide for iW-RainboW-G15M-Q7 platform
power ON procedure.
2.
How to connect the Debug port of iW-RainboW-G15M-Q7 with host PC? What are the settings to be done in
host side to connect the debug port of iW-RainboW-G15M-Q7 platform?
Refer the section
Debug UART Setting
of Quick Start Guide for iW-RainboW-G15M-Q7 platform debug port
connection procedure.
3.
How to connect the Peripherals to iW-RainboW-G15M-Q7 platform?
To connect the peripherals with iW-RainboW-G15M-Q7 platform, Refer the section
Peripheral connection
procedure
of Quick Start Guide.
4.
How to change the boot mode settings for iW-RainboW-G15M-Q7 platform/ How to switch to serial
downloader mode in iW-RainboW-G15M-Q7 platform?
Refer the section
Boot Mode Selection
of Quick Start Guide for iW-RainboW-G15M-Q7 platform boot mode
procedures.
5.
How to change the boot media settings for iW-RainboW-G15M-Q7 platform / is it possible to change the
boot device / what are the boot device is supported in iW-RainboW-G15M-Q7 platform?
Refer the section
Boot device selection
of Quick Start Guide for iW-RainboW-G15M-Q7 platform boot mode
procedures.
6.
How to get the default environment variables in u-boot level after the environment variables modification?
Is it possible to erase the modified environment variables in u-boot level?
Execute the below command in u-boot console to get the default environment variables / erase the modified
environment variables.
iWave-G15 >
env default -f -a
iWave-G15 >
saveenv
iWave-G15 >
reset
7.
Is the health of the file system maintained? If turn off the power of iW-RainboW-G15M-Q7 during Linux is
booting normally / turned off the power without doing while running application.
If you power off the platform while running any application, the running application may corrupt.
