REL 1.0
Page 46 of 59
iWave Systems Technologies Pvt. Ltd.
iW-RainboW-G15M Android User Manual
Figure 37: UART window-change baud rate
Note: The default UART baud rate is 9600bps and special characters are not supported through UART.
4.10.2
CAN Interface
Note: If customer uses their own CAN device with the iW-Rainbow G15 platform then user has to take care of the
particular CAN device application part.
To test the CAN interface, two iW-Rainbow G15 platforms are used
Select CAN from the list of available interfaces and the CAN window will open as shown below
Figure 38: CAN window-1
Enter the data in the text box and click on receive on receiver and click on send on sender.
