REL1.0
Page 7 of 80
Zynq Ult MPSoC SOM Hardware User Guide
iWave Systems Technologies Pvt. Ltd.
1.
INTRODUCTION
1.1
Purpose
This document is the Hardware User Guide for the Zynq Ult MPSoC System on Module based on the Xilinx
Zynq Ult MPSoC. This board is fully supported by iWave Systems Technologies Pvt. Ltd. This Guide provides
detailed information on the overall design and usage of the Zynq Ult MPSoC System on Module from a
Hardware Systems perspective.
1.2
SOM Overview
The Zynq Ult MPSoC SOM is an extension of Zynq Ult MPSoC. Zynq Ult MPSoC SOM has a
form factor of 95mm x 75mm and provides the functional requirements for an embedded application. Two high
speed ruggedized terminal strip connectors provide the carrier board interface to carry all the I/O signals to and from
the Ult MPSoC SOM.
1.3
List of Acronyms
The following acronyms will be used throughout this document.
Table 1: Acronyms & Abbreviations
Acronyms
Abbreviations
ADC
Analog to Digital Converter
ARM
Advanced RISC Machine
BSP
Board Support Package
CAN
Controller Area Network
CPU
Central Processing Unit
DDR4 SDRAM
Double Data Rate fourth-generation Synchronous Dynamic Random Access Memory
FPGA
Field Programmable Gate Array
eMMC
Embedded Multimedia Card
GB
Giga Byte
Gbps
Gigabits per sec
GEM
Gigabit Ethernet Controller
GHz
Giga Hertz
GPIO
General Purpose Input Output
I2C
Inter-Integrated Circuit
IC
Integrated Circuit
JTAG
Joint Test Action Group
Kbps
Kilobits per second
LVDS
Low Voltage Differential Signalling
MAC
Media Access Controller
MB
Mega Byte
Mbps
Megabits per sec
