Hardware User Manual for G8 Q7M i.Mx51 Module
Rev 1.0
Page
6
of
34
iWave Systems Technologies Pvt. Ltd.
1. Introduction
1.1 Purpose
The purpose of this document is to explain the procedure about the user interface, Power ON
procedure for i.Mx51 Q7 Module.
1.2 Scope
This document describes the Hardware details, ATK flash programming and setting up Serial
communication with PC/Laptop & ATK Flash programming for i.Mx51 Q7 Module.
1.3 Acronyms and Abbreviations
Table 1: Acronyms and Abbreviations
Acronyms
Description.
ATK
Advanced Tool Kit
CAN
Controller Area Network
LCD
Liquid Crystal Display
DDR
Double Data Rate
FAQ
Frequently Asked Question
HT
Hyper Terminal
MMC
Multi Media Card
PC
Personal computer
RS232
Recommended Standard 232
SATA
Serial Advanced Technology Attachment
SD
Secure Digital
UART
Universal Asynchronous Receiver Transmitter
USB
Universal Serial Bus
VGA
Video graphic Array
