Commissioning protocol
AirModule 6 720 813 268(2014/10)
62
20
Commissioning protocol
Commissioning date:
Customer address:
Surname, Given name:
Address:
City:
Telephone:
Installation company:
Surname, Given name:
Street address:
City:
Telephone:
Product information:
Product model:
TTNR:
Serial number:
FD-no.:
Installation components
: Receipt/value
Room controller
Yes |
No
Room controller with condensation sensor
Yes |
No
Solar energy
Yes |
No
Buffer cylinder
Yes |
No
Model/volume (L):
Hot water cylinder
Yes |
No
Model/volume (L):
Other components
Yes |
No
Which?
Minimum clearances heat pump:
Is the heat pump positioned on a solid and flat surface?
Yes |
No
Is the heat pump stably anchored?
Yes |
No
Minimum distance to wall? …… mm
Minimum side panel clearance? …… mm
Minimum distance to roof? …… mm
Minimum distance in front of the heat pump? …… mm
Is the heat pump positioned so that no snow or rain can slide or drip down
from the roof?
Yes |
No
Heat pump condensation water hose
Has the condensation water hose been fitted with a heating cable?
Yes |
No
Heat pump connections
Have the connections been professionally installed?
Yes |
No
Who laid/delivered the power cable?
Heat pump module minimum distance:
Minimum distance to wall? …… mm
Minimum distance in front of the heat pump module? …… mm
Heating:
Has the expansion vessel pressure been established? …….. bar
Has the heating system been flushed before installation?
Yes |
No
The heating system has according to the established expansion vessel
prepressure been filled to …….. bar?
Yes |
No
Has the particle filter been cleaned?
Yes |
No
Electric connection:
Are the low voltage wires at a distance of at least 100 mm from the 230 V/
400 V wires?
Yes |
No
Have the CAN BUS connections been installed correctly?
Yes |
No
Has a power guard been connected?
Yes |
No
Is the outside temperature sensor T1 positioned correctly on the coldest side
of the house?
Yes |
No
Table 45 Commissioning log