11
After that, mount the anti-glare cone on the light probe.
Battery
We recommend fully charging the battery before the
first use! If the battery is fully charged, it features a
curing capacity of approximately 20 minutes in the High
Power program and approximately 10 minutes in the
Turbo program.
Slide the battery straight into the handpiece until you
hear and feel it click into place.
Gently place the handpiece in
the corresponding rest in the
charging base without using
any force. If a hygiene sleeve is
used, please remove it before
you charge the battery. If possi-
ble, use the light always with a
fully charged battery. This will
prolong the service life. It is
therefore recommended to
place the handpiece into the
charging base after each
patient. If the battery is fully
discharged, the charging time
is 2 hours.
Since the battery is an expendable part, it has to be
replaced after its typical life cycle has expired after
approximately 2.5 years. See battery label for the age
of the battery.
Battery charging status
The respective charging status is indicated on the
charging base as described on Page 6.
