iVina BulletScan S300, User Manual

Page: 88 / 108

6-2
6.1 The BulletScan Manager
The buttons on the scanner are controlled by the BulletScan
Manager. It is installed by default from the CD when you use
the Easy Installation mode, and is selected by default when
choosing the Advanced Installation mode.
Please consult the BulletScan Manager Manual for how to use
and configure the buttons.
The BulletScan Manager provides you with an easy way to scan
your document and then link the scanned image to your
designated software application. All this can be done by a
simple touch of the button on the scanner. It is recommended
to examine the button configurations first for the best results.
6.2 Scanning From One Touch of the Buttons
1. Adjust the paper guide for the width of paper and load the
document facing down with their tops into the automatic
document feeder.
2. Check the number on the knob of the scanner to ensure if
you are selecting the proper scan settings and destination
application.
3. Press the Scan button on scanner.
4. After the scanning is finished, the destination application
will be launched and the scanned image appears in the
application.