Iveco NEW DAILY, Instructions Manual

Page: 13 / 240

NEW DAILY
–
GENERAL INFORMATION
GENERAL INFORMATION
1.1 SCOPE OF THE GUIDELINES
5
–
Printed 603.95.789
–
1 Ed. - Base 02/2014
GENERAL INFORMATION
1.1
SCOPE OF THE GUIDELINES
The scope of this publication is to provide information, features and instructions for fitting and transformation of the original
IVECO vehicle in order to ensure its functionality, safety and reliability.
These Guidelines also aim to indicate to Bodybuilders:
●
the quality level to be obtained;
●
obligations regarding the safety of operations;
●
obligations regarding the objective responsibility of the product.
It should be noted that the collaboration with IVECO is based on the assumption that the Bodybuilder uses the maximum of their
technical and organisational skills and that operations are technically and perfectly complete. As outlined below, the topic is extens-
ive and we can only provide the rules and minimum precautions that can allow development of the technical initiative.
Faults or defects caused by total or partial failure to comply with these Guidelines are not covered by the guarantee on the chassis
or relative mechanical units.
1.2 TECHNICAL DOCUMENTATION AVAILABLE ELECTRONICALLY
On the website www.ibb.iveco.com the following technical documentation is available:
●
Guidelines for transformation and fitting of vehicles;
●
technical specifications;
●
truck diagrams;
●
tractor diagrams;
●
chassis diagrams;
●
other range-specific data.
Requests to access the site must be made exclusively at www.ibb.iveco.com .
1.3 IVECO AUTHORISATION
Modifications or fittings proved in these Guidelines and carried out in respect of the same do not require a specific authorisation.
On the other hand, IVECO authorisation is required to carry out:
●
particular changes to the wheelbase;
●
work on the braking system;
●
modifications to the steering system:
●
modifications to the stabiliser bars and suspensions;
●
modifications to the cab, cab mounts, locking and tilting devices;
●
modifications to intake, engine exhaust and SCR components;
●
applications of retarders;
●
power take-off applications;
●
variations in tyre measurements;
●
modifications to hook organisms (hooks, fifth wheels).