Iveco N60 ENT M37, Technical And Repair Manual, Page: 76 / 194

N60 ENT M37 ELECTRICAL EQUIPMENT
3.76
APRIL 2004
The wiring connecting the electro-injectors to ECU is made
up by two branches: the first one is located in the bay that
houses the timing elements, the second one is integrated in
the engine wiring and ends with 3 connectors four- way.
The 3 wiring inside the timing bay have been made with pairs
of conductors whose insulation is apt to withstand the hard
conditions met in that environment; every couple of con-
ductor is braided to avoid the generation of electromagnet-
ic interferences.Pay special attention to the phases of con-
nection of the terminals of the wiring of the electro-injectors
which have to take place among conductors spotless clean
and applying the correct tightening torque.
Electro-injectors connectors
1 2 1 2 1 2 1 2 1 2 1 2
4 3 1 2 4 3 1 2 4 3 1 2
Figure 28
04_230_N
Figure 29
04_231_N
1. Electro-injectors cylinders 1 and 2 connector - 2. Electro-injectors cylinders 3 and 4 connector -
3. Electro-injectors cylinders 5 and 6 connector.
1 2 3