Page 7
Operation and Maintenance
Envistar Top 04-21
DSET.220501.07.en
Continuous product development may give rise to specification changes without notice.
2.4 CE marking and EU Declaration of Conformity
The air handling units and cooling unit or reversible heat pump (if selected) are
CE marked, which means that upon delivery they conform to applicable provi-
sions in EU Machinery Directive 2006/42/EC as well as to other EU Directives
applicable to the types of air handling units, e.g. Pressure Equipment Directive
PED 2014/68/EU.
As certification confirming that the requirements have been met, we pro-
vide an EU Declaration of Conformity, which is available under Documenta-
tion at
, or under Order Unique Documentation at
0
1
Art. Nr. 19194-0001_01
1
2
3
180 s
Typical CE label for air handling units
00018
0409
Cooling unit
Order number
Code Key
Model
Name of project
Date of manufacture
PS Max allowable pressure
PT Test pressure
TS Temperature range
Protection level - low
Protection level - high
Refrigerant / Fluid group
GWP
Refrigerant charge Circuit 1
Refrigerant charge Circuit 2
Refrigerant charge Circuit 3
IV Produkt AB
VÄXJÖ, SWEDEN
Contains fluorinated greenhouse gases
covered by the Kyotot protocol.
Typical CE label for cooling units
For units without integrated control equipment
The EC declaration applies only to units in the condition in which they have been
delivered and installed at the facility in accordance with the enclosed installation
instructions. The declaration does not include components that were subse-
quently added or measures subsequently taken on the unit.
2.5 Maintenance
The ongoing maintenance of this unit can be carried out either by the person
normally in charge of maintaining the building or through a contract with a well-
reputed service company.
