background image

11

C O B R A

5 1 0 0 5 9 9   R e v .   D

9. WARRANTY

This product has been carefully tested at the factory and is warranted to be free from 
any defects in materials or workmanship.  Simco-Ion will, under this warranty, repair 
or replace any equipment that proves, upon our examination, to have become defective 
within one year from the date of purchase.
The equipment being returned under warranty should be shipped by the purchaser to 
Simco-Ion, 2257 North Penn Road, Hatfield PA 19440, transportation prepaid and insured 
for its replacement cost.  Prior to returning any goods for any reason, contact Simco-Ion 
Customer Service at (215) 822-6401 for a Return Authorization Number.  This number 
must accompany all returned items.
This warranty does not apply when the equipment has been tampered with, misused, 
improperly installed, altered, has received damage through abuse, carelessness, accident, 
connected to improper line voltage, or has been serviced anyone other than an authorized 
factory representative.
The warranty does not apply when Simco-Ion parts and equipment have been energized 
by other than the appropriate Simco-Ion power supply or generator, or when a Simco-
Ion power supply or generator has been used to energize other than Simco-Ion parts 
and equipment.  Simco-Ion makes no warranty, expressed or implied, nor accepts any 
obligation, liabilities, or responsibility in connection with the use of this product other than 
the repair or replacement of parts stated herein.

8. REPLACEMENT PARTS/ADDITIONAL ITEMS

Part Description

Part Number

Accessory Nozzle

4530287

Full Grip Lever Trigger

4530329

Mounting Kit (contains mounting hook and hardware) 

5050316

SLCC HV Connector Kit

5050002

Cleaning Brush

4670204

Static Bar Checker

4000004

Summary of Contents for SIMCO ION COBRA













Reviews:

Related manuals for SIMCO ION COBRA