ORBITALUM TOOLS GmbH
D-78224 Singen www.orbitalum.com
[REV. 20200320] OC_GFX_BA_790144761_00__INH-02_EN
62
Set-up and assembly
GFX 3.0, GFX 6.6
eNGLISH
8.5.1 Inserting the saw blade
1. Loosen the nut (5)
counterclockwise
.
2. Clean the saw blade shaft (1) and vicinity.
3. Place the saw blade (3) and clamping disc (4) onto the shaft (1).
IMPORTANT!
Put the saw blade onto the shaft so that the inscription points to the clamping disc and nut.
The toothing then points in the right direction.
4. Tighten nut (5) clockwise.
5
8.6
Adjusting the tube dimension
IMPORTANT!
Warning messages are used in these instructions to warn you of possible risk of death, injury
or damage to property. Always read and observe these warning messages! To ensure safe
setting up and mounting please read all the warning messages in chap. 2, p. 40 and chap.
8, p. 56 attentively.
NOTe!
X
The steps for adjusting the tube dimension are identical for both saw blade clamping
points.
8.6.1 Setting the tube dimension with a scale
1. Loosen the star knob (1).
2. Select the tube dimension on the scale (2).
3. Slide the star knob (1) in the direction of the arrow to the
desired tube dimension.
4. Tighten the star knob (1).
2
1
