ITW Ion Systems 6422e, User Manual, Page: 8 / 34

19-6422-M-01 Rev 1 5
1.4 Power Requirements
The maximum power requirement for the Model 6422e is 6W.
Three different power supplies are available as options for the
Blower, providing 24 VDC or 24 VAC. The fourth power source is
24 VDC from your process equipment using the terminal block and
eight pin connector on the rear of the Blower.
ION Systems offers three power supplies for use with this product:
• Transformer (p/n 14-1320) for use with 120 VAC/60 Hz systems
• Transformer (p/n 14-1330) for use with 230 VAC/50 Hz systems
• Both 14-1320 and 14-1330 transformers provide the Blower
with appropriate 24 VAC
• AC/DC universal power supply (p/n 14-1322) for use with 120/
240 VAC 50/60 Hz provides the Blower with 24 VDC power.
Caution: The use of improper input voltage may result in poor perfor-
mance or damage to the unit.
Damage caused to the power supply from operation in an
environment that exceeds the specified limits will void the
warranty.
Achtung: Die Verwendung unzulässiger Eingangsspannung kann zu
schlechter Leistung und Beschädigung des Gerätes führen.
Schäden an der Stromversorgung, verursacht durch Betrieb
unter Bedingungen außerhalb der spezifizierten Grenzwerte,
fallen nicht unter die Garantiebestimmungen.