ITW Foxjet Marksman Elite User Manual Download Page 38

Page: 38 / 103

Section 6: BoxWriter© Matrix & Elite Editor

Marksman Matrix & Elite

2465-623 User Manual Rev F

Page 33

To change the font, click

the

Change

button. The

dialog at right is used to

change the default font

parameters.

The Font drop-down box

will display a list of all

TrueType fonts installed

on the system.

The Size field refers to

the height of the font in

pixels.

Average width defines

the average character

width (in pixels). A value

of 0 means that the sys-

tem will use the font's

default widths.

Backup Path

A backup of the Marksman Matrix & Elite database is stored in a backup location every

time the application is closed. The path directs where the file is saved.

Custom Date/Time Formats

To define date/time set-

tings, select

Define > Cus-

tom date/time formats

The

date/time

settings

shown here are used by

Date/time and Expiration

date elements.

To create a new custom

format, click

Add

To delete an existing cus-

tom format, select it and

click

Delete

. Multiple codes

can be selected by using

the shift and/or control

keys.

Summary of Contents for Foxjet Marksman Elite








































































































Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands

ITW Foxjet Marksman Elite, User Manual

Search results

Summary of Contents for Foxjet Marksman Elite

Reviews:

Related manuals for Foxjet Marksman Elite

Brands by name

Popular brands