Enclosure 6N Pressure Switches
Page 2
Figure 1. Enclosure 6N
Adjustable Pressure Switches
The standard process connection for each model is described in Chapter 2, and Chapter 4
on page 10 contains complete specifications.
CUSTOMER SERVICE
If you have any questions about these Pressure and Temperature Switches that are not
covered in this manual, you can contact Neo-Dyn
®
or our representatives in several ways.
The Neo-Dyn
®
customer service phone number is (661) 295-4000. Our customer service
department is open from 7:00 am to 3:30 p.m. Pacific Time.
Our Internet site is
; it includes lists of sales representatives and
distributors.
OTHER CONFIGURATIONS
WARNING
The models described in this manual are also available in special and factory-set
configurations. For these units, follow the installation and operating instructions herein,
except adhere to the pressure and electrical limits marked on the units
.
WARNING
Models 125P and 225P are tamperproof factory-set units that are installed and operated
like models 132P and 232P, but with no provision for setpoint adjustment. Again, adhere
to the pressure and electrical limits marked on the units.
PROCESS
CONNECTION
2 MOUNTING HOLES,
MODELS 125P, 132P,
225P, 232P ONLY
ADJUSTMENT COVER,
ALL MODELS EXCEPT
125P, 130P, AND 225P
1/2 in NPT
CONDUIT
FITTING
18 in (46 cm)
FREE LEADS
18 AWG STD
5.40 in Max
(137.2 mm)
2X 1.50 in
(38.1 mm)