ITS Partner O.B.S S.L · Av. Cerdanyola 79-81 Local C
08172 Sant Cugat del Vallés · Barcelona (Spain)
Phone: +34935839543 · [email protected] · www.ek.plus
22
USER MANUAL
CAP 2
Routing Management
This section shows all the routes that CAP 2 is currently using.
Static Route
1.
Add: Adds a static route. Clicking will bring up the following window:
•
Destination: Sets the destination IP address.
•
Subnet Mask: Set the subnet mask.
•
Gateway: Set the gateway.
•
Network Interface: Identifies on which interface the static route is applied.
2.
Delete: Deletes static routes that have been selected.
3.
Apply: Applies static routes that have been created.
