MINI TINY
USER'S MANUAL
9.2. SUMMARY OF POSSIBLE INCIDENTS AND SOLUTIONS
Incidences
STATUS
Solution
Transmitter does not
start.
None of the receiver
LEDs are illuminated.
Check that the transmitter power supply is
correct.
Check that the transmitter power supply is
correctly connected.
Only LED S1 lights up.
EEPROM error.
Check that it’s inserted in your
socket, if this is the case and it still doesn’t work,
contact the Technical Assistance Service.
The transmitter is not
connected to the
machine.
Connect the hose from the transmitter to the
machine's control panel using the appropriate
connectors.
The transmitter is
connected to the machine
but still does not work.
The transmitter power supply is below 45% of
the nominal.
After a change in the
working
frequency,
the machine is not
activated.
The led
on the
receiver lights up but the
receiver does not start.
Keep the transmitter running until the receiver
is switched on (maximum 1 minute). Do this as
close to the receiver as possible.
With the transmitter at
rest, the receiver
continues with the led
illuminated.
There are interferences in the working
frequency; it should be changed to another
working frequency.
19