
MINI RECEIVER
USER'S MANUAL
13
5.3. POWER SUPPLY
ATTENTION!:
THE CONNECTION MUST BE MADE IN A WAY THAT DEACTIVATING
THE GENERAL SWITCH ALSO DEACTIVATES THE RECEIVER.
ATTENTION!:
AS A SAFETY MEASURE, IT IS ESSENTIAL TO ENSURE A
GROUND CONNECTION USING THE CORRESPONDING PIN ON
THE CONNECTOR.
Itowa is not responsible for improper installation.
5.4. START-UP
Once the receiver has been installed, when the main switch of the machine is activated, the LEDs of the
receiver unit will light up as a test.
When starting up the transmitter, the receiver will start working by activating the stop and start relays (if
any) and the general contactor will be interlocked. From this moment on, the activation of any manoeuvre
in the transmitter will lead to the activation of the corresponding relay in the receiver. This selected relay
will remain active as long as the manoeuvre remains active in the transmitter.
Summary of Contents for CTN
