10
IB-P03
T
echnical
documenTaTion
Original notice - T1.10
Ensure that all power supplies are grounded between their 0V output and the main earth terminal and that all
conveyor metalworks are effectively bonded together and back to the main earth.
Devices grounding
MDR
Circuit
board
MDR
Circuit
board
L1 L2 L3
AC single or 3ph power supply
24V
0V
4.2 - m
ounTing
iB-P03
4.2.1 - Mounting a driver card
• Screw pitch for installing IB-P03: 219[mm]
• Recommended screw for mounting: M4×15 (2pcs)
• Tightening torque for screw: 0.74[Nm](7.5[kgfcm])
4.2.2 - Mounting base
• Recommended screw for mounting: M4×15
• Screw tightening torque: 0.74[Nm](7.5[kgfcm])
Make sure that the bracket is mounted along sufficiently flat and rigid frame to ensure proper piercing connection
of power supply cables.
Do not touch the case with bare hands during operation or right after operation stops as the case gets hot.
Make sure that the head of screw for mounting driver card does not touch connectors.
Mount the driver card to a frame which releases heat efficiently.
