HBV-609 Technical documentation
8
Safety precautions
Advance preparation
Check Product
Installation/Wiring
Maintenance/Inspection
noi
tar
ep
O/l
ort
no
C
sn
oit
aci
fic
ep
S
Failure to follow this could result in serious accidents. We assume no
responsibility for remodeled products.
WARNING
CAUTION
Do not use the product near places subject to explosive,
flammable gas, and/or corrosive atmosphere, and/or
combustible materials.
Failure to follow this could result in explosion, fire, electric shock and/or
injury.
When using the product in places where serious
accidents and/or damage may possibly occur, install
backup and/or fail-safe functions systematically.
Failure to follow this could result in the inability to control this product due
to driver card malfunction, which could lead to serious accidents.
Do not forcibly bend and/or pull cables.
Also, do not put heavy materials on cables, or do not get
them stuck between cables.
Failure to follow this could result in fire and/or electric shock due to cable
damage.
Make sure to attach ground wires to the conveyor body and
DC power supply unit.
Failure to follow this could result in electric shock if any malfunction or
leakage occurs.
Never remodel the driver card.
3-1.
General precautions
Do not apply strong impact and/or excessive force to the
product, such as hitting it with objects, or dropping it. Also,
do not use the equipment if strong impact has been applied,
and/or if the appearance has become deformed.
Failure to follow this could result in malfunction due to applied impact.
Observe the safety regulations for installation locations,
and/or products in use.
Do not use in a way exceeding the range of the product
specifications.
Failure to follow this could result in malfunction, fire, and/or injury.
Turn off the power supply to the product before moving
and/or installing the product, and performing maintenance
and inspection (excluding those during operation).
Working while the power is on could result in accidents due to
unexpected operation.
3.
Safety precautions
General precautions
Original notice - U1.4