7.4. Auto-ventilation
●
Auto-ventilation
●
Auto-Night
(1)
1) Only available if the connected product supports the functionality.
Always use the Auto-ventilation mode when the
ventilation system is extended with one or more sensors
for a controlled indoor climate.
-
Auto mode,
automatic mode
; control based on
existing sensors (CO
2
and/or RV). The capacity is
automatically controlled between the low mode
and high mode.
●
The RF CO
2
sensor measures the CO
2
concentration
in space.
●
The RF-RV sensor measures the relative humidity in
the space.
●
The RF-PIR sensor detects presence (and absence)
in the space.
This way, the ventilation is constantly automatically
adjusted and you are assured of a good indoor climate in
the most efficient and energy-efficient way.
a) Activate the thermostat.
On the screen, the active position is shown by means
of a white ring in the
AUTO
button.
Auto-Night
ä
Caution!
The Auto-Night mode is only available with one or
more CO
2
sensors.
During the Auto-Night mode, the capacity during low
mode is increased, so that you are assured of an optimal
climate during sleep.
Turning the Auto-Night mode on or off is as follows:
a) Activate the thermostat.
On the screen, the active position is shown by means
of the white ring in the
AUTO
button.
b) Repeatedly press the
AUTO button
to turn Auto-Night
mode on or off.
-
Auto-Night enabled: the white ring is shown
flashing.
-
Auto-Night disabled: the white ring is lit
continuously.
ä
Caution!
The Auto-Night mode does not automatically turn off.
You have to turn off the mode yourself!
28
Summary of Contents for WPU 5G 25 c
Page 1: ...A Itho Daalderop WPU 5G User manual...
Page 2: ...Translation of the original document...
Page 7: ...7...
Page 49: ...49...
