Itho Daalderop WPU 5G 25 c, User Manual, Page: 12 / 50

3. Operation
3.1. Activation thermostat
During normal operation, the thermostat is in a standby
mode. This means that the screen is turned off.
The thermostat is activated by pressing the
Itho
Daalderop LOGO , after which it displays the active
operation status.
After operation, the thermostat returns to standby mode
after 20 seconds.
When the thermostat is activated for the very first time, it
will only display the current temperature. This is the case
when the thermostat has not yet been connected to the heat
pump and has no wireless connection to any other devices.
2
1
Key
1 Screen
2 Logo (activate/confirm button)
3.2. Screen
Status
Ventilation
Temperature
Service
The screen is a capacitive touch screen. This means that
the thermostat is controlled by the physical touching of
the symbols on the screen.
The screen will normally not be active (standby), as a
means of extending the battery life.
12