*
Oriental Inspiration Company reserves the right to the interpretation of the manual.
DP-M14 A 3D
Stand Pro
ORIENTAL INSPRIRATION LIMITED
佳駿(環球)有限公司
DP-M14A 3D Stand Pro
A. Holder
C. Base
2
3
1
2
3
1
3D Stand Pro – Adjust freely
Installation
Part List
Thanks for choosing the '3D Stand
'. We recommend you review this instruction
manual first in order to have the best experience in using the stand.
In line with the policy of continued development, if there are any amendments on the
appearance, color or assemblies, please refer to the real object. Our company reserves
the right to amend on the specifications and the manual without prior notification.
Pro
Installation
Part List
1.
Please check and ensure all parts are
complete before installation.
2.
Insert the adjustable holder into the hole of the base
, and
then turn the holder to the right to tighten it with the base .
Installation is complete .
Flexible part A
This part can be rotated 360° freely.
Flexible part B
This part can be rotated 360° freely.
Flexible part C
This part can be rotated 360° freely.
Microscope
holder
Holder lock
There are two locks
on the holder,
suitable for different
size microscopes.
Knob
Turn the knob to the left to loosen the
flexible part A, B and C to adjust the holder
in any angle and then turn right to fasten.
Instruction Manual
Size
:
210x297mm Material: 80gsm woodfree paper
正反印刷
B.
Camera Fixed
Holder
3.
Camera Fixed Holder Installation
1
2
3
4
Take out the camera fixed holder ,Insert the camera fixed
holder into the holder slot ,Turn the holder to right to fix
it on the slot , Installation is complete .
1
2
3
4
Amera Fixed Holder
Suitable for different
cameras.
