iTero Element 5D Plus User Manual Download

Page: 87 / 208

a. If this is the same person, tap

Add

You are prompted to confirm whether the new patient is the same patient as the existing patient.

Figure 75: Confirmation message regarding an existing patient

b. Tap

Yes

to combine the patient data.

The patient is displayed in the

New Scan

window.

4.3.2

Searching for existing patients

When searching for an existing patient, you have to enter at least 3 characters of the patient’s name in the search
field to see a list of patients who match the search criteria.

In addition, you can search for a patient from the

Patients

page, described in section 5.1.

iTero Element® 5D Plus User manual

Summary of Contents for Element 5D Plus





































































































































































































Search results

Summary of Contents for Element 5D Plus

Reviews:

Related manuals for Element 5D Plus

Brands by name

Popular brands

iTero Element 5D Plus, User Manual

Search results

Summary of Contents for Element 5D Plus

Reviews:

Related manuals for Element 5D Plus

Brands by name

Popular brands