39
Control Software
© 2018 ITEL SNC
Right-clicking on the grid will display a popup menu for the functions:
Clear grid:
delete all the strings in the grid.
Clear selected:
deleting only strings selected in the grid.
Write selected:
Only the selected strings are sent to the device.
3.4
PS Settings
In this window, you can enter the PS strings that will be displayed in the receiver, each of which can be up
to 8 characters long.
For each string you can set the display duration in seconds.
Once set to zero, disables the corresponding string.
READ:
button for reading all the PS strings in the coder.
Warning: the strings in the program grid will be overwritten.
WRITE:
Summary of Contents for STL-SAT Changeover
