iTegno 39XX GPRS Modem
AT Commands Guide
02000C17
•
v1.5
Confidential
All specifications are correct at the time of release. iWOW Connections owns the proprietary rights to the information contained herein this
document. It may not be edited, copied or circulated without prior written agreement by iWOW Connections Pte Ltd. © 2011, 2012 iWOW
Connections Pte Ltd
200
15.2
Quality of Service Profile (Requested) +CGQREQ
Description:
This command allows the TE to specify a Quality of Service Profile that is used when the MT sends an Activate
PDP Context Request message to the network.
• Set command specifies a profile for the context identified by the (local) context identification parameter,
<cid>. The syntax form used only with parameter <cid>, causes the requested profile for the indicated context
number to become undefined.
• Read command returns the current settings for each defined context.
• Test command returns values supported as a compound value.
Syntax:
AT+CGQREQ=[<cid> [,<precedence > [,<delay> [,<reliability.> [,<peak> [,<mean>]]]]]]
Command
Possible Responses
AT+CGQREQ=[<cid>
[,<precedence > [,<delay>
[,<reliability.>
[,<peak>
[,<mean>]]]]]]
OK
or
ERROR
AT+CGQREQ?
+CGQREQ: <cid>, <precedence >, <delay>, <reliability>,
<peak>, <mean>
OK
AT+CGQREQ=?
+CGQREQ: <PDP_type>, (list of supported
<precedence>s), (list of supported <delay>s), (list of
supported <reliability>s) , (list of supported <peak>s), (list of
supported <mean>s)
OK
AT+CGQREQ=1,1,1,1,1,1
OK
AT+CGQREQ=?
+CGQREQ: "IP",(0-3),(0-4),(0-5),(0-9),(0-31)
+CGQREQ: "PPP",(0-3),(0-4),(0-5),(0-9),(0-31)
OK
AT+CGQREQ?
+CGQREQ: 1,1,1,1,1,1
OK
