System Commands
Copyright © Itech Electronic Co., Ltd.
69
SYSTem:REMote
This command is used to switch the power meter to remote control mode.In this
mode,except Esc button(pressing this button for 5s will switch the unit to local
mode),other keys are locked.
Command Syntax
SYST:REM
Parameters
None
Query Syntax
None
SYSTem:CLEar
This command is used to clear the error information.
Command Syntax
SYSTem:CLEar
Parameters
None
Returned value
None
SYSTem:RWLock
This command is used to set power meter to remote control mode via RS232
communication interface.And Esc button is not available.Other buttons are
locked too.
Command Syntax
SYST:RWL
Parameters
None
Returned value
None
SYSTem:VERSion?
This command is used to query the device version.Return value is a
character string as like “YYYY.V”.YYYY represents the year and V
means the version of that year.
