Archimede 5000 series- FM Power Amplifiers
User’s manual – Page 46 of 65
12
M
AI N T E N AN C E A N D W AR R A N T Y
12.1 Maintenance
Strictly follow what is written in this chapter.
12.1.a
Clogging by dust
Since the equipment is air cooled, it is subject to clogging by dust. Because of its high-quality materials and manufacturi
ng, if it’s
installed according to the instructions in Chapter 7
, it won’t require special maintenance for quite some time.
A regular service routine, mainly to remove internal dust from the front ventilation grid [4], is recommended over a 4 to 6 months
intervals.
12.1.b Cooling fans
It is recommended to change the cooling fans at 5 year intervals
, especially in higher temperature environments. Always use
the same high quality type. It is recommended to clean the fans whereas earth or dust are available on the blades.
12.1.c
Periodic overhaul
After a few years of continuous service, it is advisable to have the equipment overhauled in our factory or in an appointed laboratory,
where its operation can be checked against the initial parameters. In addition, any necessary maintenance operations can be carried
out.
It is also particularly important to overhauled the equipment when it has been working at high temperatures, over 30÷35°C.
Never change the original settings when the necessary, complex testing equipment and standard calibration are not available.
12.2 Warranty
Like all Italab solid state equipment, this equipment carries a one year guarantee on all its components with the exclusion of the final
R.F. power module, which may be damaged by faulty output connections.
Notes:
The above warranty is null and void if the equipment is tampered with or if failure is due to improper use or maintenance, or
external causes, such as AC power line overvoltage
The guarantee is valid only for repairs at our laboratories or at our appointed representative
The goods shall be delivered carriage prepaid to the laboratory and it shall be returned freight forward
This guarantee does not cover any consequential damage due to non-operation or faulty operation.
Summary of Contents for ARCHIMEDE 5000 Series
Page 65: ...User s manual Page 65 of 65 ...
