Italjet Dragster 2022, Maintenance Manual

Page: 42 / 165

Adjust and Display Settings
All adjustments must be made while the motorcycle
is stationary.
Kilometer/mile setting and 24-hour / 12-hour system
clock
- Press the “Mode” button until the total
kilometers/miles are displayed.
Mode Set
- Press the “Set” button for at least 10 seconds. You can
switch from the measurement unit km (kilometer) +
24-hour system clock to the mi (mile) + 12- hour
system clock, and vice versa; Some counters are reset.
Set time
- Hold the “Mode” and “Set” buttons at the same time for
more than two seconds and the hour and minute indicator
lamps start flashing.
- Press “Mode” to increase the number of hours, and press
“Set” to increase the number of minutes.
- Hold the “Mode” and “Set” buttons at the same time for
more than two seconds to confirm the time setting.
Set km/mile and partial time “Travel A or Travel B”
- Press the “Mode” button until “Travel A” or “Travel
B” is displayed. By quickly pressing the “Set” button,
you can switch between displaying partial travel
km/mile readings.
- To reset the partial travel km/mile readings and partial
time, press the “Set” button for more than two seconds
and these readings will be reset and the count will
restart.
42