Isuzu C-240PW-28, Technical Manual, Page: 120 / 235

ARMY TM 9-2815-254-24
AIR FORCE TO 38G1-94-2
d. Support weight of alternator and remove two bolts (3) washers (6), lockwashers (5) and nuts (4);
remove alternator from lower mounting bracket. Discard lockwashers (5).
e. If necessary, remove screw and washer securing bracket (7) to water pump.
3-24.3. Disassembly,
a. Benchmark front cover (10, FIGURE 3-49) stator (25) and rear cover (24) to aid in aligning parts
during assembly.
Ensure stator (25) and rear cover (24) remain together to prevent damage to
wires connecting stator to rectifier (26).
b. Remove three thru-screws (8 and 9). Remove front cover (10) with rotor (11) from stator (25)
and rear cover (24).
c. Clamp rotor (11) in a soft-jawed vise.
d. Remove nut/lockwasher (12) securing pulley (13) to rotor shaft and remove pulley (13).
e. Remove spacer (14) and front cover (10) from rotor.
f. Remove three screws (15) securing retainer (16) to front cover. Remove retainer (16) and bearing
(17) from front cover.
NOTE
If bearing (18) is removed from shaft, bearing must be replaced.
g. Remove bearing (18) from rotor shaft.
h. Remove screw (19) nuts (20) nuts (21 and 22) washers (30 and 31) and insulator (23).
i. Carefully remove rear cover (24) from stator (25).
3-94 Change 2