iStore - Installation Manual - June 2020
30
Appendix
Use of the overheating protector
The overheating protector is used to turn the power off, preventing the water from being heated too
high. To return the unit to its normal operational status it will have to be re set manually by qualified
personel.
The thermal cut-out is pre-installed in the system, no on-site installation or commissioning is
required. The recommended factory setting is 60º Celsius to prevent the thermal cut-out from
operating. The thermal cut-out operation temperature is 85º Celsius.
loosen the screws and open the cover
Push the red button
Earthing
